How to Fix a Clogged Faucet in Your Kitchen

Locate the aerator positioned at the tip of your faucet. It's a small piece with a mesh screen that helps regulate the flow of water. Grip the aerator firmly and twist it counterclockwise.

If it's too tight to remove by hand, you may need to use a wrench or pliers. Be careful not to damage the aerator of the faucet.

Use vinegar to dissolve any mineral deposits that may be causing the blockage. Fill a small bowl with white vinegar and submerge the aerator completely. Typically, soaking the aerator in vinegar for 30 minutes to an hour should suffice to dissolve mineral deposits effectively. However, if the buildup is particularly stubborn, you may want to leave it soaking for a few more hours. The acidity of the vinegar helps break down stubborn deposits, making it easier to clean the aerator.

After soaking the aerator in vinegar, it's time to thoroughly clean it. Use a small brush, like an old toothbrush, to gently scrub the aerator's mesh screen and internal components. Pay close attention to any stubborn residue that may still be present. This step ensures ​​the faucet aerator is free from any remaining mineral deposits or debris that could cause future clogs.

While the aerator is soaking, take a closer look at the faucet head itself. Inspect it for any visible debris or blockages that may be restricting the flow of water. Use a flashlight to get a better view if required.

If you see debris, use a toothbrush or small brush to scrub away the dirt gently. Be careful not to scratch the surface of the faucet head while cleaning.

After soaking the aerator and cleaning the faucet head, it's time to reassemble everything. Screw the aerator back onto the faucet in a clockwise direction, making sure it's snug but not too tight. Once the aerator is securely in place, reopen the water supply by turning the valves underneath the sink counterclockwise Finally, turn on the faucet and check to see if the water flows freely.