Tools and Materials

Tools

Materials

How to Install Sconces

Installing wall sconces is a very easy task and can be done quickly. To install a wall sconce, follow these steps:

First, you need to decide where the sconce is to be installed. Wall sconces can be used above beds, beside a mirror, near sitting areas or above, along the hallways or staircases.

You also need to consider where you choose the spot, looking at how the room is arranged and what furniture is in the area. Position the sconce against the wall so that you can determine at what height it is to be placed. Typically, sconces measure approximately 60 inches from the floor to the bottom of the sconce.

Switch off the power from the main electrical panel to your working circuit. If you are still in doubt, you should use a voltage tester. Take out the old light fixture, if there was one before, fixed in that place.

If there is no electrical box, mount one firmly into the wall. The bottom of the electric box should be at the same level as the floor at the bottom of your sconce. Use drywall anchors to mount the electrical box properly onto the drywall surface if necessary.

Pull the wiring from the nearest outlet to the new electrical box location. Tie the wires properly using electrical tapes or screws using wire nuts in case of heavier wires. Connect the outlet wires to the wires inside the electrical box. Ensure to connect all the wires as per the color coding provided in the instruction manual.

Caution

Read the manufacturer’s instructions carefully before connecting wires. Wear protective gloves and ensure that the electricity is switched off.

Safety Tips During Installation

Always ensure that you have switched off the power at the main electrical panel before undertaking electrical repairs. Use the voltage tester and touch the wires twice to ensure no power flows through them.

Do not damage any electrical wires that may already be present in the walls. Comply with all the legal requirements concerning construction and all other guidelines provided by the manufacturers.

How to Choose a Sconce for Your Wall

There is a large selection of wall sconces available. Here are some things to consider when choosing one:

1. Mounting Style:

Plug-in sconces are the easiest to install. Hardwired sconces can be more challenging to work with since they need to be wired directly to the junction box, but they look cleaner when installed.

2. Material:

Metal, wood, glass, porcelain and resin are some materials used to make them. Plan on which material will suit your setting. The location of the sconce should also be considered when choosing the room.

3. Light Source:

Sconces often have controls for brightness levels. Some models also allow you to change the light color. Select the brightness and light color of the sconce that best suits you.

4. Style:

Sconces come in many styles, such as formal, modern, transitional, coastal and others. Select the ones that match the house décor.

5. Size:

It is important to ensure that the size you choose is appropriate for the space on your wall. A standard is to leave a margin of about an inch around the sconce, so it does not appear overly cramped.

6. Budget:

Wall sconces vary significantly in price. Make sure to factor in your budget before you purchase your set of scones.

Finding the proper sconce is easy. With a couple of simple tools and supplies, you can easily install wall sconce. You will enjoy a well-placed light for years thanks to good positioning and installation. Transform that blank wall into a beautiful feature with a new eye-catching sconce.

How to Install a Wall Sconce