How to Lubricate a Garage Door

• Carefully check your garage doors for any signs of damage, such as dents, bent tracks or broken springs.
  
• If you notice any of these issues, then it’s best to contact a professional for repairs before proceeding with the lubrication process.
  

• Use a rag and mild detergent and gently wipe the garage door tracks, rollers and hinges to remove any dirt, dust or debris.
  
• This step will ensure that the lubricant can enter effectively and provide optimal protection.
  
• Check to see if the tracks have dried completely before proceeding to the next step.
  

You need to lubricate the following parts of the garage doors.

• Garage Door Springs
  Use a step ladder to reach the top of the garage door. The springs are located in the center of the top bar, between the metal plates that hold it in place. Check if the springs are functional before lubricating them with a clean cloth. If they are not functional, you need to call a technician and repair the damaged or bent springs immediately.

• Bearing Plates
  The end-bearing plates are the metal plates that hold up the garage door spring. You should lubricate them and the wheels with a soft brush, as these are the parts where most friction occurs.

• Armbar
  The armbar, also known as the opener or drawbar, hangs from the ceiling bar that attaches to the motor. Lubricate the armbar with a soft cloth as it moves the entire garage door up and down.

• Top of the Rail
  Do not grease the entire rail. Just focus on the bar by the ceiling to which the armbar attaches. This rail holds the chain that moves the garage door, so you can use an old rag to apply the lubricant.

• Chain
  The top rail, which holds the chain, has a protective coating. The garage door chain's coating provides some lubrication, but for added protection and smoother operation, consider greasing the garage door chain periodically. However, you should check your garage’s user manual to learn how to best care for the chain.

• Rollers
  Now, lubricate the rollers, which are attached to the curved track on either side of the door and the hinges. Make use of an aerosol spray to get the lubricant inside the rollers and then wipe the excess off with a rag.

• Hinges
  The hinges are the metal parts that connect the slats of the garage door. Lubricate the hinges at the points where they connect to the track. Use one or two sprays per hinge.

The next step is to test the door. You can reconnect the power source. Open and close the door several times to confirm that you have applied the grease to all the components of the door correctly.

After lubricating all the parts, if your garage door is still noisy, there might be another issue. It is time to call a professional to fix this problem.

Learning how to lubricate a garage door is a simple task that can significantly extend the life of your door’s components and ensure smooth operation. Regular lubrication keeps your garage door functioning quietly and efficiently, saving you from costly repairs. Remember to prioritize safety and consult a professional if you have any doubts or encounter difficulties.