Bamboo fencing is made of the finest tonkin Bamboo canes from the anji mountain located in china. BACKYARD X-SCAPES, Inc. Bamboo fencing goes through a rigorous process to ensure that its customers receive a quality Bamboo product. Held together by galvanized steel wires and cut to cap off the top, the Bamboo fencing panel construction comes ready to be installed and give consumers the ability to easily and quickly attach it to chain link fence, build a Bamboo gate, cover an unsightly existing gate or use it on any other project you might have in mind. With additional hardware and supplies, the versatility of these panels can range from gates to doors, additive shades for roofs, or just as a Bamboo decor accent. You can easily customize the length of the Bamboo outdoors fencing by cutting the steel wire between the poles. This is a low maintenance Bamboo fencing that is easy to care for. Care: to keep your Bamboo looking like new longer, simply seal it right after your project is done with TWP in your Bamboo color to enhance its color or use a gloss clear seal to protect your beautiful and natural Bamboo fencing against sunlight, water and temperature. Eco-friendly resource to help enhance your indoor and/or outdoor decor space.
Bamboo fencing is made of sustainable anji mountain tonkin Bamboo
Bamboo fencing is ready to install and easy to care for with low maintenance
Bamboo poles measurement is 6 ft H by 8 ft W by 0.75 D
Length can be shortened by snipping the wire at its desired length and bending the wire back into the fencing
Held together by 3 rows of 14 gauge galvanized coated wires and weights approximately 54 lbs per panel
Bamboo is a natural product and when exposed to temperature changes and humidity it can result in splitting, cracking and/or color fading; to ensure you extend the life of your Bamboo, treatment is required
Treatment: Bamboo fence is not treated; always apply a good quality, oil based, UV-resistant wood sealant using a brush for best application; minimize splitting by pre-drilling
Bamboo panels will need to be applied to supports and will not stand alone (supports not included)
Fasteners: wood screws, zip ties, or wires (not included)