Make the transition from hose bibb or garden hose to 0.710 distribution tubing or dripline with the 0.710 in. X 3/4 in. FHT Compression Adapter. On one end, a filter washer inside the adapter screens out particles before they can clog the system, and also ensures a tight bond when the fitting is tightened. The 0.710 in. tubing is inserted into the other end, where an internal barb compresses the tube to hold it in place. The compression adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking. Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, drip fittings are connectors that attach sections of tubing together or to other drip irrigation parts. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
Connects 0.710 inch tubing/dripline to hose bibb or garden hose
Transition from a water source with 3/4 MHT connection to tubing
Handles water pressures up to 50 psi
Connect 0.710 inch distribution tubing or dripline to your water source, built-in swivel allows you to add or remove the adapter without twisting and potentially kinking the tubing
Thread the 3/4 inch FHT connection point of the adapter onto the MHT connection point on hose bibb or garden hose, insert the 0.710 inch tubing into the other end, where an internal barb holds it in place
Compression fitting creates a watertight seal; internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting
Fitting is made of acrylonitrile butadiene styrene (ABS), a type of plastic, treated with UV inhibitors to prevent cracking
Comes with one 0.710 inch X 3/4 inch FHT Compression Adapter
Works with Raindrip products and other products with compatible connection type