Orbit adjustable shrub risers with adjustable nozzles allow you to adjust the riser height according to the future growth of the shrubs. While this can be accomplished with traditional PVC risers and couplings, the adjustable shrub riser is made from durable aluminum and features a locking nut which permits you to telescope the riser up or down in fine increments. The riser inlet is 1/2-inch male pipe thread (MPT) and you will typically insert it into a 1/2-inch PVC Tee or Elbow underground. The adjustable pattern nozzles permit arc adjustment from 0 to 360 degrees and radius adjustment down to 50% of the rated distance and are replaceable with all Orbit, Hydro-Rain and female-thread nozzles, as well as nozzles from other major manufacturers. Adjustable shrub risers with adjustable spray nozzles which do not have pressure-regulating riser stems and are not for sale in the State of California. Pressure regulating versions are available. For outdoor irrigation use with cold water only.
For watering trees, shrubs, perennials, or annuals of various heights
Combines an adjustable riser with a shrub adapter and spray nozzle and filter
Corrosion-resistant aluminum riser with locking nut adjusts from 16 to 30 inches
Adjustable pattern nozzle permits arc adjustment from 0 to 360 degrees
Shrub adapter allows for replacement with same or different pattern nozzle
Compatible with nozzles from Orbit, Hydro-Rain, and other major brands
Non-pressure regulating: check local code for restrictions
For outdoor and cold water use only