Use this 1/2-in tee fitting to run 1/2-in poly in opposing directions
Ergonomically designed to make installation easier and to create a secure fit based on your hand strength
Typically used under the water faucet or water source so that the tubing can be run in opposite directions to the landscapes or flower beds
To attach the 1/2-in poly tubing first push the collar back to expose the barb with a built in O-ring
Push and wiggle the 1/2-in poly onto the fitting and under the collar until snug
While holding the tubing with 1 hand turn the ears of the collar in a left counter-clockwise motion to tightened and lock onto the 1/2-in poly tubing
Repeat these steps for all 3 sides of this tee fitting
This fitting can be uninstalled easily by unthreading the collar in a clockwise motion then by pulling off the 1/2-in poly
This fitting works with 1/2-in poly tubing that has an inside dimension of 0.600-in ID and an outside dimensions of 0.700-in OD and this fitting is proudly made in the USA