The 1/4 in. Barbed Tee connects three sections of 1/4 in. supply tubing or dripline for a “T” intersection. It also connects two 1/4 in. branches to a punched hole in any size supply line. To install, insert the single-barbed tee inside the drip tubing opening and anchor in place (Tip: soften the tubing end so it’s easier to work with by soaking in hot water or leaving out in the sun for pliability.) Use fittings to set up a new drip system or expand or repair an existing system. Reusable micro fittings are made of acrylonitrile butadiene styrene (ABS). Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, drip fittings are connectors that attach sections of tubing together, or attach tubing to other drip irrigation parts. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
Create a 1/4 inch branch to supply tubing or dripline
Single-barbed tee fits firmly inside 1/4 inch tubing
Handles water pressures up to 50 psi
Connect three sections of 1/4 inch supply tubing or dripline for a “T” intersection, or add two branches of 1/4 inch tubing or dripline from a 1/2 inch, 5/8 inch, or 0.710 inch supply line
Works in a variety of areas, from small to large, flat or sloped transporting water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
Insert barbed end into the drip tubing opening and anchor it in place, soften the tubing end so it’s easier to work with by soaking in hot water or leaving out in the sun for pliability
Fitting is made of Acrylonitrile Butadiene Styrene (ABS), a type of plastic, treated with UV inhibitors to prevent cracking
1/4 inch barbed tees come in a pack of 10