Save time installing your drip system with the Adjustable Flow Bubbler Assembly. The bubbler, stake, and inlet come preassembled and ready to install. Connects with the patented Clamp N Pierce® connector which snaps the inlet into supply tubing at once. The 8-stream bubbler emits water in a full-circle pattern at up to 13 GPH and radius of up to 3 ft. (at 15-50 PSI). Use the control dial to increase or decrease the output of water to your preference. Bubbler and tubing made of polyethylene; stake and connector made of ABS; all materials treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With a non-pressure compensating emitter, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. The Bubbler Assembly comes preassembled with bubbler, stake, adjustable riser, and Clamp N Pierce inlet; ideal for groundcover, flower and vegetable gardens, trees and shrubs. Raindrip offers an emitter for every watering need
Bubbler, Clamp N Pierce inlet, and stake come preassembled
Stream spray releases water in a full-circle pattern
Discharges up to 13 GPH with radius up to 3.0 ft.
Releases water in a stream spray, full-circle pattern, amount of water flow is adjusted by turning the dial on the bubbler
Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs
Clamp N Pierce Connector pierces into 1/2 inch, 5/8 inch, and 0.710 inch supply tubing and connects 1/4 inch tubing inlet
Adjustable flow bubbler, 1/4 inch Clamp N Pierce inlet, and 6 inch stake come preassembled for a quicker install
Stream spray bubbler releases water in a full-circle pattern, Discharge rates from 0 to 13 GPH, radius from 0 to 3.0 ft (at 0-30 PSI)
Comes with one Adjustable Flow Bubbler Assembly which includes a bubbler, 6 inch stake, and 1/4 inch Clamp N Pierce inlet