This complete shop vacuum kit includes a variety of common accessories to fit to industry standard 2.5” home shop vacuum hoses. Molded in PP to ensure dimensional stability, excellent wear characteristics, and chemical resistance including oils and derivatives often found in home and commercial shop environments Included are three 2.5” X 19.5” plastic wands which stack to provide 59” of length sufficient to reach deep under work stations and up to collect dust and cobwebs on a 10 foot ceiling. Depending on the application one, two, or three wands can be used to optimize the result. Also includes a modular floor tool, a full size hard floor tool, gulper tool, crevice tool, and shop vacuum fitting.
Designed to fit to industry standard 2.5” home shop vacuum hoses and plastic wands typical of major home shop vacuums equipped with 2.5” hose
Molded in PP to ensure dimensional stability, excellent wear characteristics, and chemical resistance including oils and derivatives often found in home and commercial shop environments
Includes three 2.5” X 19.5” plastic wands which stack to provide 59” of length sufficient to reach deep under work stations and up to collect dust and cobwebs on a 10 foot ceiling
System will accept most major brand 2.25 home shop vacuum plastic wands which can be used to further extend reach and gain the benefit of the handle solution
Modular floor tool is 12 inches wide and includes a squeegee attachment
Paddle crevice design tapers to improve access down the 11” length with a notched end to insure airflow is maintained even when the tool is flat to a surface
The gulper tool has a 7” wide leading edge tapering to 5” in the trailing edge to maximize the pick-up of bulky and heavier debris profiles
