Liquid Rubber Cool Foot Deck and Dock Coating is a brush, roll, and spray high-performance acrylic elastomeric coating that reduces heat transfer by up to 35% compared to regular paint. The Cool Foot Coating cures into a durable, seamless colored waterproof membrane. Our Deck and Dock Coating is non-toxic, contains no solvents or VOC's, and is non-flammable. The cured membrane has excellent solar reflectivity and UV stability and it can be applied on its own or in combination with Liquid Rubber Seam Tape to provide a dependable, protective waterproof solution. Application: Liquid Rubber Cool Foot Coating is applied using a brush, roller, or paint sprayer to provide a seamless and fully adhered membrane to most substrates. Ensure a clean, dry surface free from dirt, dust, silicone, and loose flaky paint; can be applied over paint or stain. Use wood cleaner to prep the surface. For extra adhesion, performance, and longevity, use one heavy coat of Multi-Purpose Primer. Drying Time: The Cool Foot Coating fully cures in 24-48 hours at 25C/77F degrees and 50% relative humidity. Curing time increases in colder temperatures or higher humidity so environmental conditions must be considered before application. Do not apply below 10C/50F.
UV RESISTANCE - Our Deck Coating has excellent solar reflectivity and UV stability; reduces heat transfer by up to 35% compared to regular paint
PROTECTIVE FINISH FOR - Wood, concrete, decks, walls, fences and more for a seamless membrane
EASY TO APPLY - Use a brush, roller, or paint sprayer for a seamless and fully adhered membrane; Designed as a stand-alone coating but can also be used with Liquid Rubber Seam Tape
ENVIRONMENTALLY FRIENDLY - Liquid Rubber Deck and Dock Coating is water based, non-flammable, and non-toxic, containing no solvents or VOC's; Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
COVERAGE - Apply a minimum final thickness of 1 gallon/40 square feet (3.7 sq m); This should require 3-4 heavy coats; Heavy traffic areas require 1 gallon/30 square feet (2.8 sq m)