The CAMO Wedge clip can be installed on any board, at any angle, in any environment. The Wedge clip is approved for use for any grooved composite, PVC, and hardwood deck boards. Installation is flexible and easy. Able to be screwed in 90-degree, diagonal, or herringbone patterns, simply set the clip in the groove of the board until you're ready to fasten. No partial installation required. The 316 stainless steel gusset and 316 stainless steel screw offer superior corrosion resistance and holding power, while the nylon plastic spacer body creates an automatic 3/16 in spacing between boards, allowing for proper airflow and drainage. When you're ready to fasten, speed up the job with the included NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill-not an impact driver-during install.
ANY BOARD, ANY ANGLE: install on grooved composite, PVC, and hardwood in 90-degree, diagonal, or herringbone patterns
EASY INSTALLATION: pre-assembled clips require no partial installation - clips stay in place in the groove until ready to fasten
OPTIMAL CORROSION RESISTANCE: 316 stainless steel offers the best corrosion resistance for coastal applications or projects in highly corrosive environments
1-pass fasteners - clip prongs fit into the boards's groove and hold the clip until you're ready to fasten
Use with grooved composite, PVC and hardwood boards
Clip body creates 3/16 in (4.7 mm) spacing while the gusset holds boards down
Pre-assembled clips do not require partial installation - they stay in place in the groove until you're ready to fasten
Fasten with never-miss guide or while standing up with the CAMO clip drive or drive
Top-down access allows for easy board removal if needed