Tekton 3/8 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. Our low-profile head is reduced in every dimension: height, width, and length to increase access. The classic non-quick-release drive tang retains sockets with a spring-actuated detent ball—push the sockets onto the ratchet and pull to remove them. This release style gives the ratchet a flat back without any protruding release lever for best clearance. The sleek handle has a finger groove with pronounced interior edges for traction and control for any hand placement. Tekton ratchets meet (and most far exceed) the industry standard for proof torque, a measure of strength verified by a single-cycle test that applies torque until the specified value is reached without failure or any permanent deformation. The included 6 Inch Wobble L-Handle can be used as a complement to other drive tools, and the breaker bar can be used to reach and break free rusted or stuck nuts and bolts.
Our fine-tooth ratchet requires only a 4-degree swing arc
Ultra-Compact Head – We reduced the size in height, width, and length
Non-Quick-Release – This classic release style offers a completely flat ratchet back for clearance
Wobble L-Handle – Use as a complement to other drive tools or as a way to reach and quickly spin loose fasteners
4-pc ratchets: 4-1/2 in, 8 in, 12 in, 18 in
2-pc flex head ratchets: 8 in, 12 in
12 inch flex head bent handle ratchet
3/8 inch drive folding ratchet
18 inch breaker bar; 3/8 inch drive x 6 inch wobble L-handle
