The super-sized RP-50FC industrial oil filter crusher applies 25 tons of electric-hydraulic pressing power to flatten just about any used oil filter to 20% of its original size, all while removing 95% of the residual oil. Filters up to 15-1/4 inch long and 6 inch diameter are crushed in seconds flat. Used oil filters removed from vehicles are viewed as contaminated waste by environmental agencies. Unless you have an oil filter crusher, disposing of these old filters is hard to do without spending a fortune. An oil filter crusher like the powerful 25-ton capacity RP-50FC allows you to recycle both the oil filters and the residual oil you collect out of the crushed refuse. Converting hazardous waste into separate, easy-to-handle materials is a sure-fire way to increase your bottom line. Harnessing a tremendous 50,000 lbs. of crushing power, this oil filter crusher flattens both car and truck filters to 20% of their original size in mere seconds, squeezing out 95% of the residual oil. The used oil is gravity-drained through a transparent downspout tube and conveniently captured into storage drums that range from 5 to 55 gallons in size and are placed underneath the RP-50FC’s rugged stand.
Maximum crushing pressure of 50,000 lbs,
Filters are reduced to 20% of their original size with 95% of residual oil removed,
Automatic cycle feature lets you load the filter, push a button, and walk away,
Fulfills EPA and other mandated environmental standards
Save on waste disposal costs and storage space
Handles automotive and heavy-duty filters up to 15-1/4 inch long and 6 inch diameter
Cycle time approximately 8 to 15 seconds depending on filter size
No-mess design operates clean and efficiently to lessen spill hazards
Ergonomic controls feature automatic or manual cycles
