Convert a hose bibb or garden hose to a low-flow drip system with the 5/8 in. X 3/4 in. FHT Compression Swivel Tee. The compression fitting has two 5/8 in. compression outlets and one 3/4 in. female hose thread swivel inlet. Screw swivel hose thread onto a standard 3/4 in. MHT connection point; fit 5/8 in. supply tubing or dripline into the compression rings, where an internal barb compresses the tubing for a watertight fit. Filter washer inside screens out particles. The compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking. Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, drip fittings are connectors that attach sections of tubing together or to other drip irrigation parts. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
Converts garden hose or hose bibb to drip irrigation
One 3/4 inch FHT swivel inlet and two 5/8 inch compression outlets
Swivel makes it easy to remove tee without kinking tubing
Adds two branches of 5/8 inch distribution tubing or dripline from a 3/4 inch MHT connection point, such as a garden hose or hose bibb
Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system
Thread the 3/4 inch FHT inlet onto a garden hose, hose bibb, or faucet with a 3/4 inch MHT connection point, then on the other end, insert two sections of tubing of the compression fitting, where an internal barb will compress the tube to hold it in place
Fitting is made of acrylonitrile butadiene styrene (ABS), a type of plastic, treated with UV inhibitors to prevent cracking
Comes with one 5/8 inch Compression Tee
Works with Raindrip products and other products with compatible connection type