Bridgewell Resources Unifinished Unfinished Red oak 2-1/4-in W x 3/4-in T x Varying Length Smooth/Traditional Solid Hardwood Flooring ( 19.5-sq ft / Carton )

Unfinished solid hardwood flooring with a square-edge finish that has the smoothest surface and the most precise tongue and groove fit of any flooring on the market today. Using state-of-the-art equipment, our product is milled with precision engineering and care to produce flooring that our customers will love. NWFA-NOFMA No.2 Common Oak may contain sound natural variations of the forest product and manufacturing imperfections. The purpose of this grade is to furnish a floor suitable for homes, general utility use, or where character marks and contrasting appearance is desired. The following are not admitted: shattered or rotten ends, large broken knots, excessive bad millwork, shake, advanced rot, and similar unsound defects. Dark machine burns exceeding 3/64" (0.469") (1.19mm) deep not admitted. Knot holes and open characters which readily fill are admitted. Occasional scant thickness (hit or miss) on the back of the flooring board the entire length of the piece admitted, providing there is full bearing across the board at some point within three inches of the ends. A limited number of pieces with no tongue admitted. NWFA-NOFMA 1-1/4' (15") (381mm) Shorts Oak: Pieces 9" (228.6mm) to 18" (457.2mm) long may be bundled together and designated as NWFA-NOFMA 1-1/4' (15") (381mm) Shorts. Pieces in SHORTS bundles are graded using the same grading rules as pieces in standard bundles. Product can be graded and bundled as CLEAR, SELECT, NO.1 COMMON, NO.2 COMMON or in combination grades (ie; NO.1 COMMON and BETTER). The average board length minimum standard for NWFA-NOFMA 1-1/4" (15") (381 mm) SHORTS is 15" (381mm), regardless of the width or grade of the product.