The CAMO Wedge clip can be installed on any board, at any angle, in any environment. The Wedge clip is approved for use for any grooved composite, PVC, and hardwood deck boards. Installation is flexible and easy. Able to be screwed in 90-degree, diagonal, or herringbone patterns, simply set the clip in the groove of the board until you're ready to fasten. No partial installation required. The 316 stainless steel gusset and 316 stainless steel screw offer superior corrosion resistance and holding power, while the nylon plastic spacer body creates an automatic 3/16 in spacing between boards, allowing for proper airflow and drainage. When you're ready to fasten, speed up the job with the included NEVER-MISS Guide that helps you easily connect the T-15 bit to the exposed screw head. The T-15 Star Drive on the screw reduces cam-outs, but be sure to use a drill not an impact driver during install. Install deck clips standing up with the CAMO DRIVE system and save your back and knees.
FREE TOOL: Buy 2 pails of 900ct Wedge Clips, get a stand-up Drive tool free
UNIVERSAL CLIPS: Engineered and tested to fit most grooved composite, capped composite, PVC, and hardwood deck boards
STAND-UP INSTALLATION: Install CAMO collated edge screws, face screws, or clips while standing up, saving your back
1-pass fasteners - clip prongs fit into the board's groove and hold the clip until you're ready to fasten
Clip body creates 3/16 in (4.7 mm) spacing while the gusset holds boards down
Stand up installation of decking fasteners, saves your back and knees
One tool, three fastener styles: Edge fastening, face fastening, or universal deck clips
Tool includes a T20 driver, T15 driver, and a guide for Edge fastening (orange), Face fastening (black), and Universal Deck Clips (yellow)