For use with the DG610 and DG610.9 Cat 60V Line Trimmers, this dual exit trimmer head includes 13 ft. of .095 inch trimmer line and provides exceptional balance and strong cutting capabilities. Just bump the head on the ground to feed and trim line to the proper length. The ball bearing design reduces wear on the bump button during use. The easy wind design makes it easy to replace the line by passing the line through the eyelets with equal amounts extended on both sides, then turning the quick load section of the head to wind the line. The aluminum eyelets reduce wear providing a long lifespan for the trimmer head. Alternatively, the trimmer head will also accept .80 inch line as an alternative. This replacement head provides the ability to replace a heavily worn or damaged line trimmer head.
DUAL EXIT - This line trimmer head is dual exit, providing exceptional balance and strong cutting capabilities
BUMP FEED - With a quick bump of the head on the ground, the line will feed and trim to the proper length with a ball bearing design reduces wear on the bump button during use
INCLUDES - Trimmer head and 13ft of .095in trimmer line
COMPATIBILITY - For use with the DG610 and DG610.9 Cat 60V Line Trimmers
EASY WIND - No need to disassemble the head to replace the line, just pass 13 ft of line through the eyelets with equal amounts extended out of both side, then turn the quick load section of the head to wind the line
ALUMINUM EYELETS - Wear reducing aluminum eyelets provide a long service life for the trimmer head
