DAP Wall Spray Texture Knockdown Water Based is an easy to use aerosol for targeted wall repairs that provides excellent texture match with included straw or layering application techniques. Quick repair spray texture in a white finish and a non sag formula has strong wall adhesion. Product won’t crumble when painted and does not require priming. The grip trigger offers full hand control for an ergonomic spray. Easily create a knockdown texture effect by holding a putty knife parallel to the wall or ceiling to lightly flatten knockdown to desired texture and dipping putty knife into water between each knockdown. Complete this process immediately for fine applications, 30 secs-1 minute for medium applications and 1-2 minutes for heavy applications. Fast dry time of 30 minutes. Works as a spray texture for walls to repair textured surfaces on drywall, stucco, and plaster. Use for texture repairs and touch ups including fixture removal, small hole,s and minor repairs. Before applying, shake vigorously for one minute after mixing ball rattles in a variety of directions including upside down. Next, tear off top safety tab and select application method based on desired texture (straw is used for fine texture). Spray by pushing on lower portion of trigger keeping the can 12 to 18 inches from the surface. Works on Interior/Exterior surfaces.
Wall textured spray works for targeted repairs and features a grip trigger for full hand control
Spray texture can design is ideal for quick, targeted repair including fixture removal, small holes, and other minor texture repair
Knockdown spray on wall texture allows for excellent texture match with included straw or layering application techniques
Sag resistant formula has strong adhesion and fast dry time of 30 minutes, dry times may vary with weather or thicker application
Covers up to 100 sq ft in fine texture, 70 sq ft in medium, and 55 sq ft in heavy texture if using product texture match guidance
Drywall texture applies white and is paintable with no priming required approximately 30 minutes after application
Application tips: shake minimum of 1 minute after mixing ball begins to rattle, to spray push on lower portion of trigger
Interior/exterior knockdown water based wall texture is low odor and cleans easily with water
To knockdown, hold putty knife parallel to surface and lightly flatten to desired look, dip knife in water between each knockdown