Design It Pegasus Mortar-Free Metric 3-in Thick Series “10-Block” Wall Anchor Glass Block Installation Kit just made installing your glass block project fast and fun with a simple DYI friendly assembly solution. The Design It Metric Wall Anchor Glass Block Installation kit comes with everything you need to build up to a 10-(7.48-in x 7.48-in x 3.15-in or smaller) block wall or window. Glass block, grout and hardware are sold separately. Save time and money with this do-it-yourself simple solution installation kit. Only to be used with SEVES Metric 3-in Series Design Line glass block (7.48-in x 7.48-in x 3.15-in) Not to be used with Redi2Set 3-in Thick or SEVES 4-in Thick Series glass block.
Easy to assemble using glass block silicone instead of mortar, the kit is a mortar-free glass block installation kit that includes component quantities sufficient to build a 10-block wall or window with Pegasus Metric Series Design It glass block
Installation kit includes 1 tube of silicone, two 46-in horizontal spacers, ten 7.25-in vertical spacers and 6 wall anchors
Both horizontal and vertical spacers can be cut to fit a variety of glass block sizes and configurations
Installation kit is an easy DIY solution offering high durability and versatility with low maintenance and less waste
Kit uses glass block silicone, eliminating the need to use mortar No masonry experience required Joints may be finished with silicone or urethane grout (joints must be finished with urethane grout if project will come into repeated contact with water)
Design It Pegasus Metric 3-in Thick Series glass block, grout and hardware sold separately
10 block projects in which the width exceeds 40-in or the height exceeds 24-in may require you to order additional kits Some components are sold separately
Only to be used with SEVES Metric 3-in Series Design Line glass block (7.48-in x 7.48-in x 3.15-in) Not to be used with Redi2Set 3-in Thick or SEVES 4-in Thick Series glass block