This mounting bracket is made of white/beige powder coated steel and features upgraded equipment mounts, sometimes referred to as "feet". The upgraded feet are 1-1/4 in. tall with built-in vibration control and shock absorbers which have a positive impact on the long term operation of the condenser. This bracket is a good choice when a white finish is desired over stainless steel but coastal and harsh and/or extreme weather environmental concerns are a factor in the purchasing decision. The mounting bracket's design begins with an adjustable cross bar (33-1/2 in. long) that attaches to the wall. Since it is adjustable, this again, is another upgraded feature and takes the guess work out of what size bracket to purchase for various mini split BTU sizes. This superior mounting bracket is super strong and ideal for most mini split units up to 36,000 BTU as long as the weight does not exceed 300 lbs. 2 L-shaped brackets (18 in. x 22 in.) are hooked and bolted to the crossbar where the condenser is then mounted and secured. Many consumers and HVAC technicians prefer the use of mounting brackets verse ground pads for condenser installations for their placement versatility especially when the installation is on the second level or higher. Slight rearward tilt to wall is recommended for safety purposes. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Requires 1/2 inch (12 mm) bit.
Universal mount bracket fits most of mini split outdoor units
Upgraded 1-1/4 inch shock absorbent feet for vibration control
8.8 Grade bolts used in foldable brackets to increase reliability
Hardware included for attaching the condenser and expansion bolts to the wall mounting