Imagine a winter WITHOUT frozen pipes! EasyHeat's AHB cables prevent water-filled supply pipes from freezing all the way down to -40°F. The AHB cable is pre-assembled at the factory, so the installation process is simple…and monitoring its operation couldn’t be easier since it features a built-in energy-saving thermostat and clearly visible power indicator light. You’ll enjoy years of trouble-free service because these rugged cables are constructed with a tough XLPE inner insulation, continuous ground braid, and a weather-resistant PVC outer jacket. Each cable is UL Listed to Canadian Safety Standards and CSA Certified when used in accordance with the installation instructions on water-filled metal or plastic pipes.
AHB cables keep water flowing through plastic or metal pipes at ambient temperatures down to -40°F (-40°C)
The cables come pre-assembled and ready to install right out of the box
The AHB's bright power indicator light lets you know it’s working at a glance
The built-in, energy-saving thermostat automatically keeps the pipe at just the right temperature
Keep your water pipes flowing for only nickels per day…the energy-efficient AHB cables only consume 7 watts per foot of cable
For use on plastic or metal water-filled supply pipes at least three feet in length and up to 1-1/2 inches in diameter only
The circuit supplying the AHB cable must have ground fault circuit interrupter (GFCI) protection.
Be sure to follow all the installation instructions supplied with the cable and to make sure the installation complies with all national and local electrical codes
Installation supplies needed: scissors, tape measure, file to remove burrs, marking pencil, eye protection, EasyHeat HCA application tape or similar electrical tape, and 1/2-inch wide fiberglass or equivalent non-flammable pipe insulation with vapor seal