The FloLock 3/4 in. PVC Compression Male Adapter has a maximum working pressure of 200 psi and a 3/4 in. fitting diameter. The adapter is made of PVC for durability. Gives you fast, easy installation.
Just bottom the rubbing or pipe out, tighten the cap and you have a foolproof fitting
Stays completely corrosion-free under virtually all conditions
Eliminates expensive metal fittings
Lets you take advantage of cost-saving, time-saving polyethylene tubing for water service conditions
Average torque is 25 pound per foot for compression fittings 3/4 to 1-in
Compression fittings are not for use on compressed air lines or natural gas
When installation of standard compression fitting to ensure seal on straight line the line should be restrained from movement by compressed soil to ensure no lateral movement
When installing compression fitting need to use thrust blocking at change of direction or reduction in size of line
Not for use on pipe lines suspended on hangers