Fire-Poof is a Clear Interior Fireproofing Flame Retardant Saturant Spray For Most Fabric And Raw Wood. Fire-Poof Is Easy To Use, Has No Smell, Is Non-Toxic and has no VOCs. Fire-Poof Fire Retardant dries clear and must be applied to porous surfaces only. For Commercial Business in California and NYC, If a, Certificate of Flame-Resistance is required, please call Firetect for specific information. See Product Data Sheet for Additional Information.
No Smell, 0 VOC, Consistency Of Water
Use A Low Pressure Sprayer 100 PSI Or Below Or Product Will Atomize
Use Fan Spray Tip, Spray Evenly On All Surfaces Allow 24 Hours For Cure Time
Not For Use On Nylon Acetate Acrylic Or Plastics, Must Be Used On Porous Surfaces Only, Do Not Apply If Surface Has Been Treated With A Stain Or Water Repellent.
WOOD, Must Be Free From Coatings Such As Paint, Sealant Or Dirt, For Class A Or Class 1 Rating, Apply 150 Sq Ft/Gal To Raw Plywood Or 125 Sq Ft/Gal To Raw Lauan, For Class B Or 2 Rating, Apply 150 Sq Ft/Gal On Birch
CARDBOARD And PAPER, Apply To All Sides At 195 Square Feet Per Gallon, Thicker Cardboard May Need To Be Submerged, Length Of Dipping Or Spray Time May Vary Depending Upon Thickness Of Surface Until Positive Results Have Been Achieved
For Commercial Business In California And NYC, If A Certificate Of Flame-Resistance Is Required, Please Call Firetect For Specific Information
For Fire Code Compliance On Other Surfaces, Fire-Poof Must Be Tested By A 3rd Party Certified Laboratory
See Product Data Sheet For Proper Application Rate And Coverage, Or Contact Firetect For Additional Information