These vintage style door knob rosettes are constructed of stamped steel and come in a classic bronze finish. This type of rosette is designed for indoor use only, and it is used with other vintage style hardware by Prime-Line Products and other classic hardware manufacturers. These rosettes feature an outside diameter of 2-1/2 in., an inside diameter of 11/16 in. and have a 2 in. mounting hole center spacing. Note: if attempting to use these rosettes on doors with large, pre-drilled knob holes, the fasteners of these rosettes require a solid surface to mount to. The large 2-1/8 in. (approximate size) pre-bored holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Installation tip #1: products like fix-it-all® and Bondo body filler® have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. Installation tip #2: apply a small amount of Loctite ThreadLocker 271® to the set screw threads in the event they are loosening – Loctite® purchased separately.
Perfect for replacing old style or antique rosettes
2-1/2 inch outside diameter x 11/16 inside diameter with 2 inch hole centers
Mounting holes are 2 inch on center
Stamped steel construction with a classic bronze finish
Ideal for old style or antique passage locks
Designed for old style or antique doors that require a spindle and knobs
A Phillips head screwdriver is required for installation
Please refer to the line art drawing for dimensions and compare with your needs before ordering (not universal)
