General Pipe Cleaners Metal Drain snake

We have miniaturized our big machine power cable feed and put it on the Super-Vee to give you feeding speed and convenience you haven't seen before in a hand-held power drain cleaner in tight or awkward places, the Power-Vee is like having an extra hand. To feed the cable just start the Power-Vee and squeeze the feed lever, to retract it, reverse the motor and squeeze the lever. The feed handles 1/4 inch, 5/16 inch and 3/8 inch cables. No adjustment, disassembly, or additional parts required. Our Dyna-thrust bearing system helps carry the weight of the drum, significantly reducing wear on the motor shaft bearing and extending the life of the tool. Also adding to the Power-Vee's durability is the heavy-gauge stamped aluminum drum. Of course the cables are Flexicore with an integral wire rope center. Nobody makes cables like GENERAL. To switch to a different diameter cable, or even connect two 3/8 inch cables together, you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The tough plastic cartridges are so inexpensive, you'll probably want to store all of your cables in them. Includes: 25 feet x 1/4 inch Flexicore cable.