Cat 5e Feed-Thru connectors are single piece connectors that use the same assembly process. Open-end Feed-Thru connectors offer several advantages over standard closed end connectors. Conductor order can be verified prior to crimping. Conductors that Feed-Thru the connector are inserted far enough to be pierced by the pin below. The cable can be pushed or pulled into the connector to ensure that the twisted pairs are as close to the pin contacts as possible and that the jacket is seated beyond the primary strain relief for a secure connection. A patent pending design enables conductors to be cut flush with the end face of the connector when used with the FT-45™ tool.
Conductors trimmed to the correct length by the tool - no measuring
Eliminates wasted connectors due to incorrect assembly
Verify conductor order before crimping
Single piece design
Feed-Thru modular plugs simplify twisted pair assembly process
3 Pin IDC contact, 50 microns gold plated over 150 microns nickel no loose pins in the package
Conductors fully seated above pin contact, no opens due to a short/misaligned conductor