The LevelOne GVT-2001 MMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100/1000Base-T RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T, 100Base-TX and 1000Base-T auto-sensing. Used in multi-mode with fibre-optic cabling, this can extend a network range up to 550m. The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP ( Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as cut through and smart pass through mode. The GVT-2001 is able to operate in temperatures from -10 degrees up to 55 degrees Celsius. The converter can be used as a standalone unit or as a slide-in module to the CHV-2000 19 converter rack, which can accommodate up to 14 units for use in a central wiring closet. Features. 9K jumbo frames to increase data transfer rates. Transfers data from 10/100/1000Base-T copper to fiber interfaces. 1000Base-SX Multi-mode fiber for the link up to 550m. Built-in LFP ( Link Fault Pass-through) ( LLCF/LLR) Technology. IEEE 802.3x Flow Control protects against lost packets for reliable data transmission. Dip switches for customized configuration. Supports low-time lag transmission. Supports the transmission of extra-long packets up to 1.6KB. -10 degrees C to 55 degrees C operating temperature range Standards and Protocols:. IEEE 802.3 10-BASE-T, Ethernet. IEEE 802.3u 100-BASE-TX, Fast Ethernet. IEEE 802.3ab 1000BASE-T, Gigabit Ethernet. IEEE 802.3x Flow Control ( full-duplex flow control). IEEE802.3z 1000Base-SX/LX, General:. DIP Switch 1 LFP function. DIP Switch 2 and 3 performance 4 types work mode. DIP Switch 2 and 3 is OFF = Store and forward. DIP Switch 2 is OFF, 3 is ON = Cut through mode. DIP Switch 2 is ON, 3 is OFF = Smart pass through. DIP Switch 2 and 3 is ON = Pass through mode Specifications. Port: Fiber Duplex SC (
The LevelOne GVT-2001 MMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100/1000Base-T RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T
9K jumbo frames to increase data transfer rates
