NeoPond Sealant is a coating that is easily brushed on that cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Apply when the temperature is above 10˚C/50˚F. Apply to a clean, dry surface, free of anything that would hinder adhesion. Typically cures within 24-48 hours. Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forecasted within 24 hours. Not meant as a constant walking surface. Coverage: Flat/Ponding Surface - 40 sq ft/G per coat. Apply 3-4 heavy coats to achieve a 60-80 mil. (1.5-2.0mm) membrane. Apply the next coat when dry to touch and nothing is wet underneath. Tacky is ok. Generally, 12-24 hours between heavy coats. Amounts vary depending on surface roughness. Use all material up to achieve a long lasting membrane. Avoid hot, direct, intense sunlight during application. Remove painters tape while still wet. Clean Up: Use soap and water or mineral oil to clean skin.
LEAKY POND OR WATER FEATURE - Ponds will eventually spring a leak; Whether it’s Concrete, EPDM or Wood Liquid Rubber NeoPond Sealant is a liquid applied coating that cures into a seamless waterproof membrane
FLEXIBLE HEAVY-DUTY COATING - UV stable and easy application of a waterproofing sealant for a fully submersible water feature or pond, fish and plant safe
ENVIRONMENTALLY FRIENDLY - Liquid Rubber NeoPond Sealant is water based, containing no Solvents and ultra-low VOC's
EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane
FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile where possible movement may occur