When you’re connecting your drip irrigation system to a water source, don’t forget the pressure regulator. Without it, the excessive water pressure can blow out emitters and fittings, and damage your system. The pressure regulator lowers the water pressure to a set pressure so your drip system can work effectively—keeping your fittings and emitters in place, right where you need them. The 3/4 in. FPT X 3/4 in. FPT pressure regulator is preset at 30 PSI, and commonly used to connect an existing underground irrigation system with 3/4 in. MPT pipe to control the water pressure. Install with the directional arrow pointing in the direction of water flow. The pressure regulator is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. As part of a complete drip system, the pressure regulator connects to a water source and lowers the incoming water pressure so your drip system can work with optimal performance. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
Lowers incoming water pressure from a water source for optimal performance of your drip system; Connect to an existing underground irrigation system with a 3/4 in. MPT pipe
Attach to an existing underground irrigation system with 3/4 in. MPT pipe or fitting; position arrow on device in direction of water flow
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
Attach the pressure regulator to an existing underground irrigation system with a 3/4 in. MPT connection point; Periodically check for damage and replace as needed
Regulates water pressure from water source; preset at 30 PSI, ideal for most drip irrigation systems; Use the directional arrow on the device to position in the direction of water flow
Maintains 30 PSI
Pressure regulator is made of high-impact Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent cracking
Comes with one 3/4-in FPT X 3/4-in FPT Pressure Regulator; Use with a 3/4-in MPT Swivel Adapter to connect supply tubing
Raindrip stands by its product and gives a 1-year, 100% assurance of satisfaction: If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling