Regulate the amount of water delivered to your plants with a twist of a knob using the Adjustable Flow Bubbler. Bubbler discharges up to 11.7 GPH, with throw of up to 16 in. radius (at 15-50 PSI). Flow is adjusted by turning the head of the bubbler which acts as a dial. The 8-stream emitter releases water in a full-circle pattern. Ideal for groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs. Emitter is assembled on a 5 in. stake, and a built-in 1/4 in. barbed inlet connects to 1/4 in. supply tubing. Bubbler is made of polyethylene treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With non-pressure compensating emitters, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. Adjustable flow bubblers are easy to set up in drip systems, and can be used in place of several drippers. Raindrip offers an emitter for every watering need. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
As part of a complete drip irrigation system, the emitter delivers water gradually; with a non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
Emitter sits on top of the stake, where a 1/4 in. barbed inlet connects to 1/4 in. supply tubing; position stake in ground so the emitter can evenly water your plant’s root zone
8-stream bubbler releases water in a full-circle pattern Increase or decrease water flow by turning the dial
Discharge rates up to 11.7 GPH, radius up to 16 in. (at 15-50 PSI) Bubbler comes attached to 5 in. stake; built-in 1/4 in. barbed inlet connects to 1/4 in. supply tubing
Emitter is made of polyethylene treated with UV inhibitors to prevent fading and cracking
Periodically check for leaks or damage and replace as needed; recommended operating pressure for most emitters is between 15 to 50 PSI
Comes with ten Adjustable Flow Bubblers on 5 in. Stakes; Use with 1/4 in. Supply Tubing to transport water to plants
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling