Expand your drip irrigation system easily with the 5/8-in supply tubing that comes preassembled with hose thread swivel adapter that attaches to the water source; close the run with included end plug
Tubing outside diameter (OD) is 0.700 in., internal diameter (ID) is 0.600 in.; connects to water source or point-of-connection device with attached fitting; emitters and feeder lines can be punched directly into the line or attached to the end
Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
To use as a main supply line, attach the hose thread swivel adapter to the water source; to use as a dripper line, attach emitters directly into the line; use end plug to seal the end of run
Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content
Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting
Tubing is made of polyethylene using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking
Comes with one 50-ft coil of 5/8-in poly supply tubing preassembled with hose thread swivel adapter and end plug, Use with a pressure regulator and filter connected to the water source