Raindrip 5/8-in x 500-ft Drip Irrigation Distribution Tubing

Use as a main supply line connected to a low-flow, drip-watering device, or punch emitters into the tubing to deliver water along the run

Tubing outside diameter (OD) is 0.700 in., internal diameter (ID) is 0.600 in.; connects to point-of-connection device using appropriate fitting; emitters and feeder lines can be punched directly into the line or attached to the end

Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

To use as a main supply line, attach to a point-of-connection device connected to the water source; to use as a dripper line, attach emitters directly into the line

Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content

Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting

Tubing is made of polyethylene using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking

Comes with one 500 ft. coil of 5/8 in. poly supply tubing. Use with a pressure regulator and filter connected to the water source. Works with Raindrip products and other products with compatible connection type

Raindrip offers a 1-year warranty; if your product breaks, Raindrip will send you a new one for free, just pay shipping and handling