Convert your existing sprinkler system to a low flow watering system with the Adjustable Flow Bubbler. Built-in 10-32 threaded inlet attaches directly to the rigid riser. Easily control the water flow by turning the knob to the amount of water you prefer, from shutoff position up to 11.7 GPH, and up 16 inch radius at pressures between 15-50 PSI. The 8-stream emitter releases water in a full-circle pattern. Ideal for groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs. Bubbler is made of polyethylene treated with UV inhibitors. Drip irrigation systems are easy to customize, install, and operate. With non-pressure compensating emitters, expect varying water flows based on length of tubing or elevation, with higher flows closer to the water source. Adjustable flow bubblers are easy to set up in drip systems, and can be used in place of several drippers. Raindrip offers an emitter for every watering need.
Adjust amount of water flow by turning dial on bubbler
8-stream spray releases water in a full-circle pattern
Discharges up to 11.7 GPH with radius up to 16 inch
Releases water in a stream spray, full-circle pattern, amount of water flow is adjusted by turning the dial on the bubbler
Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs
Built-in 10-32 threaded inlet connects emitter to rigid riser
8-stream bubbler releases water in a full-circle pattern
Increase or decrease water flow by turning the dial, Discharge rates from 0 to 11.7 GPH, radius from 0 to 16 inch (at 0-40 PSI)
Comes with five Adjustable Flow Bubblers