Raindrip Drip Irrigation Garden Kit

Slowly waters the soil around your plants for complete root zone hydration; the dripline emits water along the entire line; Ideal for short runs on flat surfaces, such as vegetable gardens, flower beds, planter boxes, and plant rows

Connect 3/4 inch FHT X 1/4 inch Adapter attached to dripline to water source (pressure regulator is recommended), can cut dripline to size and connect sections with the 1/4 inch barbed fittings

Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Lay dripline near plants to water; Periodically check for leaks or damage; twice a year, remove end closures and flush circuits until water runs clear; in cold climates, to winterize completely drain system to prevent damage or splitting

Poly tubing, constructed with a durable layering method: the outer layer, and the inner layer, is made of 100% virgin content; the middle layer, composed of recycled content, 1/2 GPH non pressure-compensating emitters

Turbulent flow design flushes out sediments which can potentially clog emitters; flexible tubing bends to accommodate curved irrigation areas as well as handle straight runs; tubing can be cut to desired length

Dripline tubing made of polyethylene; emitters made of polyethylene and silicone; all treated with UV inhibitors to prevent cracking; Barbed fittings made of Acrylonitrile Butadiene Styrene (ABS), treated with UV inhibitors to prevent cracking

50 feet of 1/4 inch Dripline preassembled with 1/2 GPH drippers, 5 barbed tees, 5 barbed elbows, 5 barbed couplings and 5 end plugs, Use with a 3/4 inch FHT X 1/4 inch adapter to connect to water source

Flow rate may vary along the length of dripline, with a non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source