Rust Bullet DuraGrade CLEAR – a high performance clear coat for concrete, metal, wood, and more. Ideal for commercial, industrial, automotive, marine, home, and farm projects. Rust Bullet DuraGrade Clear is an impact resistant, ultra-low VOC, high-performance, clear, rust inhibitive, protective coating. With just 49 g/l of VOCs, DuraGrade Clear’s patent pending formula is an environmentally preferred ultra-low VOC coating compliant in every state and air quality management district. DuraGrade Clear can be used as a standalone coating or as a topcoat and can be applied directly onto clean or rusted metal, concrete, wood, and other surfaces. DuraGrade Clear has superior adhesion and provides excellent corrosion protection and abrasion resistance. Easy to apply by brush, roller, or spray equipment. Scratch, chip, chemical, and UV resistant. Ideal for indoor or outdoor surfaces. Perfect for sealing in Rust Bullet Color Flakes, Rust Bullet's decorative color flakes for concrete applications. Anti-skid material can be added for a slip-resistant surface. Dries to a water clear finish. Performance Testing: Taber Abrasion (ASTM D4060): 38 mg/10,000 cycles; Impact Resistance (ASTM D2794): >40 inches (exceeds max test limits); Mandrel Bend (ASTM D 522-13): >32% without cracking (exceeds test); Pull-off Adhesion bond strength (ASTM D7234-05): 50mm dolly: >525 PSI (dollies unable to be removed at ~525 max psi), 20mm dolly: >1485 PSI (the concrete broke apart before DuraGrade lost adhesion).
The newest and most advanced technology in corrosion control and protective coatings - apply to metal, concrete, wood, and other substrates - can be applied directly over rust - provides a beautiful, water clear, gloss finish
Use as a stand-alone coating or a topcoat over any Rust Bullet coating - ideal for industrial, automotive, marine, home and farm projects, and more
Excellent abrasion, UV, chemical, scratch, and chip resistance, non-yellowing - perfect for sealing in decorative flakes over a Rust Bullet DuraGrade CONCRETE coating - add anti-skid material to create a slip-resistant finish
Easy to apply by brush, roller, or spray equipment - a minimum two coat application is required when used as a stand-alone coating - dry time between coats is 2 to 6 hours - covers approximately 1500 sq ft per 5 gallons, per coat
Environmentally preferred Ultra-Low VOC - ideal for indoor or outdoor surfaces - Made in the USA