ET-3G is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). ET-3G has a long working time — 50 min at 70°F (21°C) , and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50°F (10°C) to 110°F (43°C). Simpson Strong-Tie® epoxy anchors for concrete and masonry are rigorously tested to meet IBC requirements, including for both cracked and uncracked concrete applications.
Ideal for general doweling and threaded rod applications
Extended working times at elevated temperatures
Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
Easy hole cleaning — no power-brushing required
Suitable for use in dry or water-saturated concrete
Manufactured in the USA using global materials
22-oz side-by-side cartridge with (1) mixing nozzle and (1) extension
Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions; modification or improper use of mixing nozzle may impair ET-3G adhesive performance
Install using the EDT22S, EDTA22P or EDTA22CKT dispensing tools and EMN22i mixing nozzle
