The Square D X Series 3A 500W single-pole Occupancy/Humidity Sensor Light & Fan Control Back Wires is an occupancy sensor, light switch, and fan control in a single, easy-to-clean matte finish. Automate lights to ON/OFF based on occupancy and available natural light to make saving energy easy. Enable manual control of the fan or lights at any time via two independent push buttons. Adjust timing for fans and lights in increments of 10, 20, or 30 minutes. Set relative humidity levels between 30-85%. Complete the look with one of the Square D X Series cover plates (not provided) that easily snaps into place for a modern, flush-facing finish to your walls. Enjoy a consistent look in your room or home with the full line of Square D X Series switches, dimmers, sensors, and receptacles.
Square D X series light/fan control has motion & humidity sensor
Two independent pushbuttons to manually control fan or light
Wall plate required, sold separately
Switchable between occupancy detection (lights on/off are fully controlled) and vacancy detection (lights manual on and auto off)
2 independent push buttons provide manual control of the fan or light
Independent light sensor won't turn lights on if room has sufficient ambient light
Fan and light timing can be independently set in increments of 10-minutes, 20-minutes or 30-minutes
Humidity level can be set between 45% to 80% relative humidity
CA title 24 compliant