Designed to be mounted to a flat surface with 72 in. total cable length - 54in. attached to the unit and 18in. of accessory cableand#59; Quick-disconnect battery clamps. Ring terminals 3-pin XLR 3-12C cableHas Charger status LED indicators and is Microprocessor controlled with a multi-stage charging algorithm. This Charger has Safe-start, reverse polarity and short circuit protection. The charger will not apply current to the battery clamps until they are properly connected. In Maintain mode it monitors the battery voltage to keep it fully charged. The charger is Thermal Runaway Protected and is Temperature controlled. The Heavy duty aluminum case - weighs less than2 poundsIt Charges compatible battery types - 24 volt lead-acid, AGM and gel cell batteries. This charger is Perfect for hard-to-access batteries - mobilized wheelchairs, electric scooters, hospital beds and other battery powered devices. FeaturesCharges compatible battery types - 24 volt lead-acid, AGM and gel cell batteries72in. Total cable length - 54'' attached to the unit and 18'' of accessory cableHeavy duty aluminum case - weighs less than 2 poundsMaintain mode - monitors the battery voltage to keep it fully chargedDesigned to be mounted to a flat surfaceSpecificationsVoltage: 24VAmperage: 5AWeight: 3.2 lbs
Charges compatible battery types - 24 volt lead-acid, AGM and gel cell batteries
72in. Total cable length - 54 attached to the unit and 18 of accessory cable