The ETS InstaSnake PA200 Series is configured for 3 sends and 1 return. Each passive send unit (PA205F) features 3 Female XLR and 1 Male XLR to RJ45 jack, all pins. Each passive receive unit (PA205M) features 3 Male XLR and 1 Female XLR to RJ45 jack, all pins. The PA205 will send phantom power over standard Cat5 or 6 cables. Phantom power has been tested to 850 feet over shielded cable.The basic units are a pair of passive units with bi-directional capability which can be input directly into analog or digital consoles. Designed to the highest professional standards the InstaSnake has a wide, flat frequency response, low THD and residual noise. The InstaSnake has been factory tested to 1900 feet over CAT5 using low Z dynamic microphones. FeaturesVery easy transportLow costNo ground loopsAdd second unit to increase the number of channelsMay be used for analog or digital audioSupports 48V phantom powerRugged, road-ready' constructionRoHS compliantUSA Made100% testedSpecificationsDistance: UTP 1900 ft. STP 850 ft phantom power only Up to 1105 ft (44.1 KHz.48 KHz sampling rate) Up to 877 ftConnectors: Female or Male XLR to Ethercon RJ45 jack or 110 punchdownChannel: 3Weight: 1 lbs
Very easy transport
Low cost