Seamlessly multicast HDMI signals via IGMP protocol from hosts to adjacent routers on IPv4 networks with the Ocean Matrix HDMI-2-IPV2 Extender. Now streaming HDMI over your network has never been easier and long distance limitations are eliminated. The send and receive system is a cost effective solution for sending HDMI 1.3 over networks and can be configured in point-to multipoint setups.The Ocean Matrix HDMI-2-IPV2 employs advanced HDbitT over IP technology to take advantage of LAN switches supporting IGMP protocols. This allows the creation of a multiple HDMI extender matrix for up to 99 transmitters and unlimited receivers in a system. HDMI signal flows can be carried over a single CAT5-5e-6 cable up to 394 feet. The Ocean Matrix HDMI-2-IPV2 brings unparalleled performance in PRO-AV projection networks, digital signage systems and educational streaming applications. Now your network is your HDMI network! Units also support IR pass back functionality for device control from the receiver location. In addition, computer control software can be employed to select and switch between source devices.FeaturesRoute up to 99 HDMI Sources to Multiple HDMI Devices Through LAN Switch with IGMPScalable and Flexible Input-Output Matrix Configuration Allowing 99 Inputs to Infinite OutputsMax Resolution:Point-to-Point and Point-to-Multipoint ConnectionsIR Pass Back Function Controls Source from RX Location using the IR Remote ControlIncludes Computer Control Software to Select and Switch Source Device InputHDMI Signal 1.3, Compliant to HDCPHDMI 1080p Multipoint to Multipoint Over IP Single CAT5, CAT6 ExtenderSpecificationsTally In: D-sub 25-pin (female) Shared with REMOTE IN4 inputs x 2 colors (red or green color frame display)TTL negative logic level signal or make-contact inputAudio Format: PCMTMDS Signal: 0.7-1.2Vp-pDDC Signal: 5Vp-pPower Supply: 5Vdc-1APower Consumption: 4W Each UnitNetwork Bandwidth: 18Mbps
