Fully enclosed remote power supply with knockouts and clips for line voltage wiring, Soft start, short and overload circuit protection features, For use with WAC Lighting Basics and Gemini Tape Light systems
1W Minimum load to support low load LED systems, Intrinsically safe, Class 2 transformers permit no greater than a 5 amp current to be drawn, Includes a 72in lead wire for Basics and Gemini, longer lead wires (T24-BS-EX2) are sold separately
Secondary wiring for Class 2 transformers does not require conduit sheathed cable or clamp wiring techniques, Suggested low voltage wire type (Sold separately): 14 - 18 guage stranded or solid, Non-metallic sheathed cable may be used for secondary wiring in walls and ceilings
Input Voltage: 120-277VAC, Output Voltage: 24VDC, Available in 60W and 96W options.
Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer, Dimmers should always be installed on the primary side of the transformer.
Standards: UL and cUL Listed for Damp Locations IP20 rated, CEC Title 24 and ADA Compliant.