Envirosheet, sub floor is a special high density EPS foam product designed for applications which require insulation and a thermal break under flooring assemblies (insulated sub floor panel), where low water absorption, mold and mildew resistant and high strength are the key. This product is designed as an air and vapor barrier with an R5 thermal break and large surface drainage channels, to be installed quickly and easily under 4 x 8 sheets of tongue and groove or regular OSB or plywood ( minimum 3/4" ) when building an insulated sub floor or deck space on top of an existing concrete slab or wooden floor. Ideal applications include basement floors, factory floors and agricultural building floors. All sheets are R5- 1 in. thick x 24 in. x 48 in with a vacuum applied mold vapor and mildew resistant film surface on the lower drainage plane side. This allow fast easy installation in even tight locations like basements and crawl spaces and they can be transported in any regular car due to the convenient package size. Exceptional long term thermal resistance and increased R value in lower temperatures. Allowing assemblies to dry over time. No off gassing and does not contain fluorocarbons.
Board compressive strength is 22 psi or 3000 lbs per sq ft load capacity with an R5 value, has less than 1.5% water absorption and 0.42 perms
Panel is acceptable for roof, floor and wall insulation in residential, agricultural, commercial and industrial construction
Raised square blocks and deep valleys with a laminated vapor barrier surface film on the bottom face allow for both water and air movement under the floor facilitating drying
Can be used for the following applications: exterior/interior sub floor assemblies both on and below grade, walls, attics and re-siding projects