Ditra-PS is a peel and stick uncoupling membrane designed for ceramic and stone tile installations on floors. It features a pressure-sensitive adhesive eliminating the need for thin-set to install the membrane. The peel and stick version provides the same uncoupling, load distribution, waterproofing and vapor management functions as the original Ditra. Ditra-PS can be installed over a variety of substrates such as concrete, plywood, and OSB. Use Schluter-Primer-PS to prime the subfloor prior to installing Ditra-PS to create a uniform layer and a stronger bond. Ditra-PS is available in rolls or sheets.
No thin-set required to install the membrane
Features a pressure-sensitive adhesive to bond the membrane to the substrate
Uncoupling membrane prevents cracked tile and grout
Peel and stick means less mess and fewer tools needed for install
Ditra-PS is 1/8-in thick and is designed for ceramic, porcelain and stone tile
Install over a wide range of substrates including plywood, OSB, and concrete
Provides uncoupling, waterproofing, vapor management, and load distribution
Roll covers 269-sq ft
Use with Schluter-Primer-PS for a stronger, more reliable bond