Armstrong S-761 Seam Adhesive is easy to use. It is a single component product used directly from the bottle (no mixing required) to seal the seams of both residential and commercial vinyl sheet flooring on large jobs where seaming is required. For ease of installation, apply a 1/8-in bead of adhesive along the seam edge of the flooring material and the subfloor, tuck other side of flooring material into the seam, allowing the adhesive to ooze up to the top of the floor. And for clean-up, remove excess wet adhesive with a clean, damp cloth.
Recommended for use in installation of sheet vinyl where seaming is required for a strong seam bond
Simple application from squeeze bottle, no mixing required
Easy clean up of excess wet adhesive with a damp clean cloth
Water based/resin seam adhesive for use with all sheet vinyl flooring products
Creates a strong bond at the seam that can be walked on after 2 hours; full dry time is 4-6 hours
Shelf life of 1 year if not opened
Working time of 15 minutes; note: working times vary based on job conditions, subfloors, temperature and humidity
8 oz bottle will do 144 LF
VOC content 136 g/L