The most cost-effective friction free tile leveling system on the market. The microlevel kit 150 includes 150 bases/cones/nuts. Microlevel guarantees simple and fast tile laying, eliminating slippage between tiles, thus ensuring perfectly level floors and coverings.microlevel Is recommended for the laying of large porcelain stoneware, ceramic and natural stone tiles, as well as thin porcelain stoneware or agglomerate stone slabs (thickness 3/6 mm, 1/8 in. - 1/4 in.). The system is composed of 3 elements: base, cone and nut. It does not require the use of pliers or tools of any type. This system also allows fast removal in the event joints need to be cleaned of any fresh glue, which in certain situations may fall between the tiles during laying. Immediately after the cleaning phase, the system can easily be reinserted to keep the tiles level until the glue has hardened.
System has been designed to apply pressure through the screwing of the nut onto the cone, which is free; the system is able to efficiently level tiles without causing any twisting phenomena between tiles and without rubbing against the tile surface
Nut produces vertical pressure on the cone, which is free, thus preventing any undesired horizontal movement of the tiles, which would otherwise create incorrect tile alignment and therefore inconsistent joint sizes
Cone does not rub against the surface of the tiles, which would otherwise be stained or marked
System is able to level tiles gradually, increasing or decreasing the applied pressure by simply rotating the nut, thus allowing the installer the possibility to make any small adjustments that might be needed during installation
Composed of 3 elements base, cone and nut
Not require the use of pliers or tools
Guarantees perfectly leveled floors with simple, fast tile laying