Count on Zoeller®pumps to deliver the very best solutions as the leading brand for pumps and pump accessories. Since 1939, this commitment to top quality offers you years of service and durability provided by a family owned company with product made in the USA. Our Model 912 is a preassembled sewage ejector package that comes with all of the key components required for installation. It is ideal for those looking to install a job ready sewage ejector system. Purchasing a job ready package reduces installation errors while minimizing cost. The Model 912 sewage ejector package is designed for burial flush-to-grade. The access cover is the only part that is visible after installation. The package comes preassembled in an 18 inch x 30 inch polyethylene structural foam (PSF) basin. It includes our Model 264 sewage pump with a piggyback switch on a float tree for easy inspection and maintenance. The Model 264 is a 4/10 HP pump. The vortex impeller design of the Model 264 allows the pump to pass 2″ spherical solids limiting the potential for clogging and unwanted downtime. The basin comes complete with a 2 inch PVC discharge pipe that includes a predrilled 3/16″ weep hole to prevent the pump from becoming airlocked. The basin’s cover includes a cord seal for the pump’s electrical cord along with a predrilled 2 inch vent hole. The cover is sealed in place prior to shipment. The pre-plumbed 4 inch inlet hub makes for a quick connection to the main sewage line. Each basin is filled with environmentally friendly packing peanuts prior to shipment to ensure things remain in place during transit. The packing material is water soluble, so it will disappear on the first use. Job ready, fast, and easy installation!
Preassembled sewage ejector package for a job ready, fast, and easy install
Package is pre-plumbed with our Model 264 a fully automatic 115 V, 4/10 HP sewage pump
18 inch x 30 inch polyethylene cover and basin with a 4 inch inlet, 2 inch vent, and 2 inch discharge
Designed for burial flush-to-grade, the access cover is the only part that is visible after installation
The pump's 115 V electrical cord seal is sealed in the cover
The single piggyback pump switch is installed 180° from the 4 inch inlet to prevent the float from being affected by the inflow of raw sewage
The discharge pipe is plumbed with a pre-drilled 3/16 inch weep hole to prevent the pump from becoming air-locked
The polyethylene cover comes sealed and bolted down so the system is water and gas tight eliminating the escape of any odor
Compatible with most styles of Zoeller® pumps check valves (check valve not included)